Library › Hardware › Clamp-in bearing plate: 2 in, two ISO 2852 faces, spigot with two…

clamp-in bearing plate

clamp-in bearing plate: ISO 2852 face (flat, gasket groove on Ø56.5, rim 2.85) and 20° back on both sides, Ø50.8 neck, 16 face to face; Ø16 spigot 52.1 inward with a 623 seat at its end, 623 seat 3.1–7.1 inside the inner face, Ø4 bore between; Ø12 bore and Ø44 × 7.8 flywheel pocket in the outer face; 4 × Ø4 vents

Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.

STEP STL free, CC BY 4.0 (credit "Xem Studio")

Dimensions

feature	flywheel pocket
value	Ø44 × 7.8, Ø12 hub bore

Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.

Set it up →

From the full sheet

Clamp-in bearing plate: 2 in, two ISO 2852 faces, spigot with two 623 seats: every size, notes, mating features and sources. How do I carry a crankshaft inside a sealed tri-clamp vessel without a shaft seal?