Xem Studiomeasured geometryLibrary › Hardware › Tri-clamp flexure leaf: spiral planar spring clamped in a 2 in joint…
displacer leaf
displacer leaf: Ø64 × 0.5 rim (clamped from Ø47.5 out), hub Ø18 with Ø12 bore, 3 arms 3 wide sweeping 400° from r 9 to r 23.75
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Dimensions
| leaf | displacer |
|---|---|
| t_mm | 0.5 |
| arm_w_mm | 3.0 |
| sweep_deg | 400 |
| hub_bore_mm | 12.0 |
| k_axial_N_m | 730 |
| k_radial_kN_m | 40.0 |
| MPa_per_mm | 14.3 |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Tri-clamp flexure leaf: spiral planar spring clamped in a 2 in joint like a gasket: every size, notes, mating features and sources. Can a flexure bearing be clamped in a tri-clamp joint?