Xem Studiomeasured geometryLibrary › Hardware › Step-up gears for a generator inside a 2 in tri-clamp cross: 42 …
crank gear
crank gear: module 1, 42 teeth, 20° (pitch Ø42, tip Ø44), 12 wide, Ø3 bore, radial M3 tapped hole (Ø2.5) at mid-width
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Dimensions
| part | crank gear |
|---|---|
| teeth | 42 |
| pitch_dia_mm | 42.0 |
| tip_dia_mm | 44.0 |
| width_mm | 12.0 |
| bore_mm | 3.0 |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Step-up gears for a generator inside a 2 in tri-clamp cross: 42 : 15, module 1: every size, notes, mating features and sources. What step-up gears fit inside a 2 inch tri-clamp cross?