Xem Studiomeasured geometryLibrary › Hardware › Tri-clamp heat shield washer: 0.6 mm, ½ to 4 in tube
1.5 in heat shield washer Ø75.5 OD (clamp OD + 16) × Ø50.5 bore (= flange OD) × 0.6
1.5 in heat shield washer Ø75.5 OD (clamp OD + 16) × Ø50.5 bore (= flange OD) × 0.6: slides over a ferrule rim and rests on the hot-end clamp, shading the tube above the joint
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Tri-clamp heat shield washer: 0.6 mm, ½ to 4 in tube: every size, notes, mating features and sources. What goes between the flame and a tri-clamp clamp?
Other sizes
- 0.75 in heat shield washer Ø50 OD (clamp OD + 16) × Ø25 bore (= flange OD) × 0.6
- 2 in heat shield washer Ø89 OD (clamp OD + 16) × Ø64 bore (= flange OD) × 0.6
- 2.5 in heat shield washer Ø102.5 OD (clamp OD + 16) × Ø77.5 bore (= flange OD) × 0.6
- 3 in heat shield washer Ø116 OD (clamp OD + 16) × Ø91 bore (= flange OD) × 0.6
- 4 in heat shield washer Ø144 OD (clamp OD + 16) × Ø119 bore (= flange OD) × 0.6