Xem Studiomeasured geometryLibrary › Hardware › Materials & stock ·
Brass and copper stock sizes: C360 brass round rod, C110 copper flat bar, copper sheet (oz weights) and C260 brass sheet
What diameters does C360 brass rod come in, and what thicknesses are copper sheet and C110 copper bar? · Standard part · basis: Alcobra, Continental Steel and Metals4U brass rod lists; Alcobra and Materials Plus copper flat bar; copper.org and Materials Plus copper sheet; Metals Depot brass sheet; numbers only
Also called: brass rod sizes, c360 brass rod diameters, brass round bar sizes, copper flat bar sizes, c110 copper bar thickness width, copper sheet thickness oz, 16 oz copper sheet thickness, copper sheet 20 oz thickness inches, brass sheet thickness, c260 brass sheet sizes, brass rod 1/2 inch, copper bar 1/4 x 1, free machining brass rod sizes, copper bus bar sizes
Exact dimensions. True size, with no tolerance added.
- sizes
- 163 in table
Notes
- Brass: C360 is free-cutting brass (UNS C36000, 'free machining brass'). Alcobra Metals lists 31 round rod diameters from .063 to 6.5 in; Continental Steel lists five small sizes (1/16 to 0.086 in) with weight per foot; Metals4U's listing titles name 14 sizes. They agree where they overlap (1/16 is on Alcobra and Continental; 1/8, 1/4, 3/8, 3/4, 1-1/4, 1-3/8, 1-3/4 and 3 in are on Alcobra and Metals4U; 5/16, 9/16, 5/8 are on Metals4U as .313, .563, .625 on Alcobra). Metals4U titles the 5/8 listing '.675' (a typo for .625). Continental's 0.0781 row prints 1.766 lb/ft, which contradicts its own 0.212 lb per 12 ft; not used. Weights per foot for the other four Continental sizes agree to 3 digits with a diameter x 0.307 lb/in³ section weight (a check, not data).
- Copper flat bar (C110): Alcobra lists 49 thickness x width sizes (seven are marked rounded edge); Materials Plus lists 30 sizes, all H02, full round edge, ASTM B187, 144 in, with weight per foot. Materials Plus's weights are about 3 to 6 % below a sharp-cornered section at 0.323 lb/in³, which is the effect of the round edge. Sizes on both lists: 1/8 x 3/4, 1, 1-1/2, 2; 3/16 x 3/4, 1, 1-1/4, 1-1/2, 2; 1/4 x 3/4, 1, 1-1/4, 1-1/2, 1-3/4, 2, 2-1/2, 3, 4, 6; 3/8 x 1, 1-1/2, 2, 3, 4. The two lists do not conflict, but they are different stocks (Alcobra rows give no temper).
- Copper sheet is sold by weight per square foot: 12, 16, 20, 24, 32, 48 oz are the standard weights in copper.org's Table 1.2A (width 30 or 36 in, length 96 or 120 in; sheet is wider than 24 in, strip 24 in or less). Table 1.2B gives nominal and minimum thickness for 6 to 48 oz (16 oz = 0.0216 in nominal). Materials Plus lists C110 sheet in 0.016 to 0.1875 in with tolerances and the same oz equivalents (12 / 16 oz = 0.0216, 20 oz = 0.027, 24 oz = 0.0323, 32 oz = 0.0431); the oz thicknesses agree exactly with copper.org's. Online Metals' copper sheet listings name 0.0216 (22 mil, 24 gauge) and 0.016 (16 mil, 26 gauge).
- Brass sheet: Metals Depot's C260 (cartridge brass) H02 sheet and plate, 0.032 to 0.500 in with weight per square foot; Online Metals' C260 listings add 0.010, 0.016, 0.025, 0.032, 0.040 (titles). Brass sheet in C360 was not found. Lewis Brass lists A260 brass sheet / plate and A110 copper sheet but prints no sizes on the page read.
- No STEP/STL: rod, bar and sheet are plain cylinders and boxes. Copper and brass pipe and tube: copper-pipe-type-l-m, brass-tube-ks. Copper gauge for sheet metal: sheet-metal-gauge-chart-steel-galvanized-stainless-aluminum.
Brass and copper stock sizes: C360 brass round rod, C110 copper flat… size chart
| product | size (as printed) | mm | weight / note | temper / stock |
|---|---|---|---|---|
| C360 brass round rod | .063 in (Alcobra, as printed) | 1.60 | — | F.C. half hard |
| C360 brass round rod | .125 in (Alcobra, as printed) | 3.17 | — | F.C. half hard |
| C360 brass round rod | .156 in (Alcobra, as printed) | 3.96 | — | F.C. half hard |
| C360 brass round rod | .188 in (Alcobra, as printed) | 4.78 | — | F.C. half hard |
| C360 brass round rod | .219 in (Alcobra, as printed) | 5.56 | — | F.C. half hard |
| C360 brass round rod | .25 in (Alcobra, as printed) | 6.35 | — | F.C. half hard |
| C360 brass round rod | .313 in (Alcobra, as printed) | 7.95 | — | F.C. half hard |
| C360 brass round rod | .375 in (Alcobra, as printed) | 9.52 | — | F.C. half hard |
| C360 brass round rod | .438 in (Alcobra, as printed) | 11.13 | — | F.C. half hard |
| C360 brass round rod | .5 in (Alcobra, as printed) | 12.70 | — | F.C. half hard |
| C360 brass round rod | .563 in (Alcobra, as printed) | 14.30 | — | F.C. half hard |
| C360 brass round rod | .625 in (Alcobra, as printed) | 15.88 | — | F.C. half hard |
| C360 brass round rod | .688 in (Alcobra, as printed) | 17.48 | — | F.C. half hard |
| C360 brass round rod | .75 in (Alcobra, as printed) | 19.05 | — | F.C. half hard |
| C360 brass round rod | .875 in (Alcobra, as printed) | 22.22 | — | F.C. half hard |
| C360 brass round rod | 1.00 in (Alcobra, as printed) | 25.40 | — | F.C. half hard |
| C360 brass round rod | 1.063 in (Alcobra, as printed) | 27.00 | — | F.C. half hard |
| C360 brass round rod | 1.125 in (Alcobra, as printed) | 28.57 | — | F.C. half hard |
| C360 brass round rod | 1.25 in (Alcobra, as printed) | 31.75 | — | F.C. half hard |
| C360 brass round rod | 1.375 in (Alcobra, as printed) | 34.92 | — | F.C. half hard |
| C360 brass round rod | 1.5 in (Alcobra, as printed) | 38.10 | — | F.C. half hard |
| C360 brass round rod | 1.75 in (Alcobra, as printed) | 44.45 | — | F.C. half hard |
| C360 brass round rod | 2 in (Alcobra, as printed) | 50.80 | — | F.C. half hard |
| C360 brass round rod | 2.25 in (Alcobra, as printed) | 57.15 | — | F.C. half hard |
| C360 brass round rod | 2.5 in (Alcobra, as printed) | 63.50 | — | F.C. half hard |
| C360 brass round rod | 3 in (Alcobra, as printed) | 76.20 | — | F.C. half hard |
| C360 brass round rod | 3.5 in (Alcobra, as printed) | 88.90 | — | F.C. half hard |
| C360 brass round rod | 4 in (Alcobra, as printed) | 101.60 | — | F.C. half hard |
| C360 brass round rod | 4.5 in (Alcobra, as printed) | 114.30 | — | F.C. half hard |
| C360 brass round rod | 5 in (Alcobra, as printed) | 127.00 | — | F.C. half hard |
| C360 brass round rod | 6.5 in (Alcobra, as printed) | 165.10 | — | F.C. half hard |
| C360 brass round rod | 0.0625 in (Continental Steel) | 1.59 | 0.0113 lb/ft | UNS C36000, 12 ft mill length |
| C360 brass round rod | 0.072 in (Continental Steel) | 1.83 | 0.015 lb/ft | UNS C36000, 12 ft mill length |
| C360 brass round rod | 0.0781 in (Continental Steel) | 1.98 | printed 1.766 lb/ft: typo, not used (0.212 lb per 12 ft on the same row) | UNS C36000, 12 ft mill length |
| C360 brass round rod | 0.081 in (Continental Steel) | 2.06 | 0.019 lb/ft | UNS C36000, 12 ft mill length |
| C360 brass round rod | 0.086 in (Continental Steel) | 2.18 | 0.0214 lb/ft | UNS C36000, 12 ft mill length |
| C360 brass round rod | 1/8 in (Metals4U title) | 3.17 | — | C36000 free cutting |
| C360 brass round rod | 1/4 in (Metals4U title) | 6.35 | — | C36000 free cutting |
| C360 brass round rod | 5/16 in (Metals4U title) | 7.94 | — | C36000 free cutting |
| C360 brass round rod | 11/32 in (Metals4U title) | 8.73 | — | C36000 free cutting |
| C360 brass round rod | 3/8 in (Metals4U title) | 9.52 | — | C36000 free cutting |
| C360 brass round rod | 13/32 in (Metals4U title) | 10.32 | — | C36000 free cutting |
| C360 brass round rod | 17/32 in (Metals4U title) | 13.49 | — | C36000 free cutting |
| C360 brass round rod | 9/16 in (Metals4U title) | 14.29 | — | C36000 free cutting |
| C360 brass round rod | 5/8 in (Metals4U title) | 15.88 (title prints .675 in) | — | C36000 free cutting |
| C360 brass round rod | 3/4 in (Metals4U title) | 19.05 | — | C36000 free cutting |
| C360 brass round rod | 1-1/4 in (Metals4U title) | 31.75 | — | C36000 free cutting |
| C360 brass round rod | 1-3/8 in (Metals4U title) | 34.92 | — | C36000 free cutting |
| C360 brass round rod | 1-3/4 in (Metals4U title) | 44.45 | — | C36000 free cutting |
| C360 brass round rod | 3 in (Metals4U title) | 76.20 | — | C36000 free cutting |
| C110 copper flat bar | 0.125 x 0.75 in (Materials Plus) | 3.17 x 19.05 | 0.35 lb/ft (section 0.36; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.125 x 1 in (Materials Plus) | 3.17 x 25.40 | 0.47 lb/ft (section 0.48; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.125 x 1.5 in (Materials Plus) | 3.17 x 38.10 | 0.71 lb/ft (section 0.73; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.125 x 2 in (Materials Plus) | 3.17 x 50.80 | 0.95 lb/ft (section 0.97; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.125 x 4 in (Materials Plus) | 3.17 x 101.60 | 1.91 lb/ft (section 1.94; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.1875 x 0.75 in (Materials Plus) | 4.76 x 19.05 | 0.54 lb/ft (section 0.55; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.1875 x 1 in (Materials Plus) | 4.76 x 25.40 | 0.7 lb/ft (section 0.73; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.1875 x 1.25 in (Materials Plus) | 4.76 x 31.75 | 0.88 lb/ft (section 0.91; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.1875 x 1.5 in (Materials Plus) | 4.76 x 38.10 | 1.06 lb/ft (section 1.09; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.1875 x 2 in (Materials Plus) | 4.76 x 50.80 | 1.42 lb/ft (section 1.45; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 0.75 in (Materials Plus) | 6.35 x 19.05 | 0.67 lb/ft (section 0.73; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 1 in (Materials Plus) | 6.35 x 25.40 | 0.91 lb/ft (section 0.97; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 1.25 in (Materials Plus) | 6.35 x 31.75 | 1.16 lb/ft (section 1.21; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 1.5 in (Materials Plus) | 6.35 x 38.10 | 1.4 lb/ft (section 1.45; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 1.75 in (Materials Plus) | 6.35 x 44.45 | 1.64 lb/ft (section 1.70; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 2 in (Materials Plus) | 6.35 x 50.80 | 1.88 lb/ft (section 1.94; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 2.5 in (Materials Plus) | 6.35 x 63.50 | 2.36 lb/ft (section 2.42; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 3 in (Materials Plus) | 6.35 x 76.20 | 2.85 lb/ft (section 2.91; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 4 in (Materials Plus) | 6.35 x 101.60 | 3.81 lb/ft (section 3.88; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 5 in (Materials Plus) | 6.35 x 127.00 | 4.78 lb/ft (section 4.84; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 6 in (Materials Plus) | 6.35 x 152.40 | 5.74 lb/ft (section 5.81; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.25 x 8 in (Materials Plus) | 6.35 x 203.20 | 7.68 lb/ft (section 7.75; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.3125 x 4 in (Materials Plus) | 7.94 x 101.60 | 4.75 lb/ft (section 4.84; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.375 x 1 in (Materials Plus) | 9.52 x 25.40 | 1.33 lb/ft (section 1.45; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.375 x 1.25 in (Materials Plus) | 9.52 x 31.75 | 1.69 lb/ft (section 1.82; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.375 x 1.5 in (Materials Plus) | 9.52 x 38.10 | 2.06 lb/ft (section 2.18; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.375 x 2 in (Materials Plus) | 9.52 x 50.80 | 2.78 lb/ft (section 2.91; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.375 x 3 in (Materials Plus) | 9.52 x 76.20 | 4.23 lb/ft (section 4.36; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.375 x 4 in (Materials Plus) | 9.52 x 101.60 | 5.68 lb/ft (section 5.81; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.375 x 5 in (Materials Plus) | 9.52 x 127.00 | 7.13 lb/ft (section 7.27; full round edge) | H02, ASTM B187, 144 in |
| C110 copper flat bar | 0.125 x 0.375 in (Alcobra) | 3.17 x 9.52 | — | temper not stated |
| C110 copper flat bar | 0.125 x 0.5 in (Alcobra) | 3.17 x 12.70 | — | temper not stated |
| C110 copper flat bar | 0.125 x 0.75 in (Alcobra) | 3.17 x 19.05 | — | temper not stated |
| C110 copper flat bar | 0.125 x 1 in (Alcobra) | 3.17 x 25.40 | — | temper not stated |
| C110 copper flat bar | 0.125 x 1.25 in (Alcobra) | 3.17 x 31.75 | — | temper not stated |
| C110 copper flat bar | 0.125 x 1.5 in (Alcobra) | 3.17 x 38.10 | — | temper not stated |
| C110 copper flat bar | 0.125 x 2 in (Alcobra) | 3.17 x 50.80 | — | temper not stated |
| C110 copper flat bar | 0.188 x 0.75 in (Alcobra) | 4.78 x 19.05 | — | temper not stated |
| C110 copper flat bar | 0.188 x 1 in (Alcobra) | 4.78 x 25.40 | — | temper not stated |
| C110 copper flat bar | 0.188 x 1.25 in (Alcobra) | 4.78 x 31.75 | — | temper not stated |
| C110 copper flat bar | 0.188 x 1.5 in (Alcobra) | 4.78 x 38.10 | — | temper not stated |
| C110 copper flat bar | 0.188 x 2 in (Alcobra) | 4.78 x 50.80 | — | temper not stated |
| C110 copper flat bar | 0.25 x 0.5 in (Alcobra) | 6.35 x 12.70 | — | temper not stated |
| C110 copper flat bar | 0.25 x 0.625 in (Alcobra) | 6.35 x 15.88 | — | temper not stated |
| C110 copper flat bar | 0.25 x 0.75 in (Alcobra) | 6.35 x 19.05 | — | temper not stated |
| C110 copper flat bar | 0.25 x 0.75 in rounded edge (Alcobra) | 6.35 x 19.05 | — | temper not stated |
| C110 copper flat bar | 0.25 x 1 in (Alcobra) | 6.35 x 25.40 | — | temper not stated |
| C110 copper flat bar | 0.25 x 1.25 in (Alcobra) | 6.35 x 31.75 | — | temper not stated |
| C110 copper flat bar | 0.25 x 1.5 in (Alcobra) | 6.35 x 38.10 | — | temper not stated |
| C110 copper flat bar | 0.25 x 1.75 in (Alcobra) | 6.35 x 44.45 | — | temper not stated |
| C110 copper flat bar | 0.25 x 1 in rounded edge (Alcobra) | 6.35 x 25.40 | — | temper not stated |
| C110 copper flat bar | 0.25 x 2 in (Alcobra) | 6.35 x 50.80 | — | temper not stated |
| C110 copper flat bar | 0.25 x 2 in rounded edge (Alcobra) | 6.35 x 50.80 | — | temper not stated |
| C110 copper flat bar | 0.25 x 2.5 in (Alcobra) | 6.35 x 63.50 | — | temper not stated |
| C110 copper flat bar | 0.25 x 3 in (Alcobra) | 6.35 x 76.20 | — | temper not stated |
| C110 copper flat bar | 0.25 x 3 in rounded edge (Alcobra) | 6.35 x 76.20 | — | temper not stated |
| C110 copper flat bar | 0.25 x 4 in (Alcobra) | 6.35 x 101.60 | — | temper not stated |
| C110 copper flat bar | 0.25 x 6 in (Alcobra) | 6.35 x 152.40 | — | temper not stated |
| C110 copper flat bar | 0.375 x 0.5 in (Alcobra) | 9.52 x 12.70 | — | temper not stated |
| C110 copper flat bar | 0.375 x 0.75 in (Alcobra) | 9.52 x 19.05 | — | temper not stated |
| C110 copper flat bar | 0.375 x 1 in (Alcobra) | 9.52 x 25.40 | — | temper not stated |
| C110 copper flat bar | 0.375 x 1.5 in (Alcobra) | 9.52 x 38.10 | — | temper not stated |
| C110 copper flat bar | 0.375 x 1.5 in rounded edge (Alcobra) | 9.52 x 38.10 | — | temper not stated |
| C110 copper flat bar | 0.375 x 2 in (Alcobra) | 9.52 x 50.80 | — | temper not stated |
| C110 copper flat bar | 0.375 x 2.5 in (Alcobra) | 9.52 x 63.50 | — | temper not stated |
| C110 copper flat bar | 0.375 x 3 in (Alcobra) | 9.52 x 76.20 | — | temper not stated |
| C110 copper flat bar | 0.375 x 4 in (Alcobra) | 9.52 x 101.60 | — | temper not stated |
| C110 copper flat bar | 0.5 x 0.75 in (Alcobra) | 12.70 x 19.05 | — | temper not stated |
| C110 copper flat bar | 0.5 x 1 in (Alcobra) | 12.70 x 25.40 | — | temper not stated |
| C110 copper flat bar | 0.5 x 1.5 in (Alcobra) | 12.70 x 38.10 | — | temper not stated |
| C110 copper flat bar | 0.5 x 2 in (Alcobra) | 12.70 x 50.80 | — | temper not stated |
| C110 copper flat bar | 0.5 x 2.5 in (Alcobra) | 12.70 x 63.50 | — | temper not stated |
| C110 copper flat bar | 0.5 x 3 in (Alcobra) | 12.70 x 76.20 | — | temper not stated |
| C110 copper flat bar | 0.5 x 4 in (Alcobra) | 12.70 x 101.60 | — | temper not stated |
| C110 copper flat bar | 0.5 x 6 in (Alcobra) | 12.70 x 152.40 | — | temper not stated |
| C110 copper flat bar | 0.625 x 2 in (Alcobra) | 15.88 x 50.80 | — | temper not stated |
| C110 copper flat bar | 0.75 x 4 in (Alcobra) | 19.05 x 101.60 | — | temper not stated |
| C110 copper flat bar | 1 x 2 in (Alcobra) | 25.40 x 50.80 | — | temper not stated |
| C110 copper flat bar | 2 x 4 in (Alcobra) | 50.80 x 101.60 | — | temper not stated |
| C110 copper sheet | 6 oz: 0.0081 in nominal, 0.0071 in minimum (copper.org Table 1.2B) | 0.206 / 0.180 | 6 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 8 oz: 0.0108 in nominal, 0.0097 in minimum (copper.org Table 1.2B) | 0.274 / 0.246 | 8 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 10 oz: 0.0135 in nominal, 0.0124 in minimum (copper.org Table 1.2B) | 0.343 / 0.315 | 10 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 12 oz: 0.0162 in nominal, 0.015 in minimum (copper.org Table 1.2B) | 0.411 / 0.381 | 12 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 16 oz: 0.0216 in nominal, 0.0204 in minimum (copper.org Table 1.2B) | 0.549 / 0.518 | 16 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 20 oz: 0.027 in nominal, 0.0258 in minimum (copper.org Table 1.2B) | 0.686 / 0.655 | 20 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 24 oz: 0.0323 in nominal, 0.0308 in minimum (copper.org Table 1.2B) | 0.820 / 0.782 | 24 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 32 oz: 0.0431 in nominal, 0.0411 in minimum (copper.org Table 1.2B) | 1.095 / 1.044 | 32 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 48 oz: 0.0646 in nominal, 0.0621 in minimum (copper.org Table 1.2B) | 1.641 / 1.577 | 48 oz/ft² | standard 30 or 36 in wide, 96 or 120 in long (Table 1.2A: 12, 16, 20, 24, 32, 48 oz) |
| C110 copper sheet | 0.016 in (Materials Plus) | 0.406 | — | H00; 36 x 96 in |
| C110 copper sheet | 0.0216 in (Materials Plus) | 0.549 | — | H00 12 oz / 16 oz; 36 x 120 or 36 x 96 in |
| C110 copper sheet | 0.027 in (Materials Plus) | 0.686 | — | H00 20 oz; 36 x 120 or 36 x 96 in |
| C110 copper sheet | 0.0323 in (Materials Plus) | 0.820 | — | H00 24 oz; 36 x 120 or 36 x 96 in |
| C110 copper sheet | 0.0431 in (Materials Plus) | 1.095 | — | H00 32 oz; 36 x 120 or 36 x 96 in |
| C110 copper sheet | 0.02 in (Materials Plus) | 0.508 | — | H02; 36 x 96 in |
| C110 copper sheet | 0.025 in (Materials Plus) | 0.635 | — | H02; 36 x 96 in |
| C110 copper sheet | 0.032 in (Materials Plus) | 0.813 | — | H02 and O60; 36 x 96 in |
| C110 copper sheet | 0.04 in (Materials Plus) | 1.016 | — | H02 and O60; 36 x 96 in |
| C110 copper sheet | 0.05 in (Materials Plus) | 1.270 | — | H02 and O60; 36 x 96 in |
| C110 copper sheet | 0.062 in (Materials Plus) | 1.575 | — | H02 (36 x 96 and 48 x 96) and O60 (0.0625); 36 x 96, 48 x 96 in |
| C110 copper sheet | 0.08 in (Materials Plus) | 2.032 | — | H02; 36 x 96 in |
| C110 copper sheet | 0.125 in (Materials Plus) | 3.175 | — | H02; 36 x 96 in |
| C110 copper sheet | 0.156 in (Materials Plus) | 3.962 | — | H02; 36 x 96 in |
| C110 copper sheet | 0.187 in (Materials Plus) | 4.750 | — | H02; 36 x 96 in |
| C260 brass sheet / plate | 0.032 in (Metals Depot) | 0.813 | 1.42 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.04 in (Metals Depot) | 1.016 | 1.78 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.05 in (Metals Depot) | 1.270 | 2.22 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.063 in (Metals Depot) | 1.600 | 2.78 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.08 in (Metals Depot) | 2.032 | 3.55 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.125 in (Metals Depot) | 3.175 | 5.55 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.1875 in (Metals Depot) | 4.762 | 8.32 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.25 in (Metals Depot) | 6.350 | 11.17 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.375 in (Metals Depot) | 9.525 | 17.25 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
| C260 brass sheet / plate | 0.5 in (Metals Depot) | 12.700 | 23.08 lb/ft² | H02, ASTM B36; 1x1, 2x2, 3x4, 3x8 ft and more |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
Xem scan
File coming
No downloadable true-size file yet: the published figures do not fix the whole shape, and Xem never guesses a number. A measured scan is planned; request it and it moves up.
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=brass-and-copper-rod-bar-sheet-sizes
Fits with
Free
Copper pipe (ASTM B88 Type L and M), 1/4 to 2 inch8 sizes★ 8 filesFree
Hobby brass tube (K&S), 1/16–21/32 in and 1–12 mm, telescoping32 sizes★ 32 filesFreeCopper solder (sweat) fittings: nominal size to tube OD, 1/4 to 3 in, and solder coupling length (ASME B16.22 family)11 sizes★ sheetFreeSheet metal gauge chart: steel, galvanized, stainless and aluminum (10, 12, 14, 16, 18, 20 gauge in inches and mm)36 sizes★ sheetFreeBar stock sizes: 1018 steel round and square 1/8 to 6 in, 6061 aluminum square 1/4 to 8 in (distributor list, inches and mm)57 sizes★ sheetFreeAluminum flat bar and round bar sizes (6061-T6): 64 flat sizes 1/8 x 1/2 to 1-1/4 x 3, 37 round diameters 1/4 to 10 in, with weight per foot101 sizes★ sheetFreeStainless steel round bar sizes (304): 1/8 to 12 in diameter with weight per foot; flat bar thickness and width ranges33 sizes★ sheetFreeAcetal (Delrin) rod diameters: 1/8 to 2 in and 4 to 250 mm nominal sizes50 sizes★ sheetFree
Copper tube Types K, L, M and DWV (ASTM B88 / B306): OD, wall and ID, 1/4 to 12 in, + 100 mm hollow sections307.97×307.97×100.0 mm★ 38 files
Questions
How thick is 16 oz copper sheet?
0.0216 in nominal (0.549 mm), 0.0204 in minimum (copper.org Table 1.2B); Materials Plus lists the same 0.0216 in.
What diameters does C360 brass rod come in?
Alcobra lists 31 from .063 to 6.5 in (.125, .25, .375, .5, .75, 1, 1.25, 1.5, 2, 3, 4 and more); full list in the table.
What sizes is C110 copper flat bar?
1/8, 3/16, 1/4, 5/16 or 3/8 in thick by 3/4 to 8 in wide in the Materials Plus list; Alcobra's list runs from 1/8 x 3/8 to 2 x 4 in.