Xem Studiomeasured geometryLibrary › Electronic components › Modules, sensors & displays ·
SLAMTEC RPLIDAR S3 lidar: 55.6 mm base, M2.5 mounting holes and optical window height
What are the SLAMTEC RPLIDAR S3 dimensions, mounting holes and optical clearance? · Modern device · basis: SLAMTEC RPLIDAR S3 datasheet v1.0, Figure 4-1 Mechanical Dimensions.
Also called: SLAMTEC RPLIDAR S3, rplidar s3, slamtec s3, slamtec rplidar s3 dimensions, rplidar s3 mounting holes, 360 degree lidar scanner
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 55.6 mm
- width
- 55.6 mm
- height
- 41.3 mm
Notes
- Datum: bottom mounting face on z=0, centred on X and Y; the cable exits on the −Y side.
- Base 55.60 × 55.60 × 23.35 high; overall height 41.30 to the top of the optical housing (Ø50.2, chamfered to Ø41.2 at the top).
- Four M2.5 threaded holes in the bottom face on a 43.00 × 43.00 square centred on the base, max screw engagement 4.0 mm.
- Optical band z=23.35..41.30 must stay clear through the full 360°.
- Not modelled: cable, strain relief and XH2.54-5P plug (the cable exit reaches 59.80 from the +Y edge), the bottom recess and case screws.
- Dimensions are exact nominal mm; the housing diameter is scaled from the drawing.
SLAMTEC RPLIDAR S3 lidar: 55.6 mm base, M2.5 mounting holes and… size chart
| hole | x (mm) | y (mm) | thread | depth (mm) |
|---|---|---|---|---|
| 1 | -21.5 | -21.5 | M2.5 | 4.0 |
| 2 | 21.5 | -21.5 | M2.5 | 4.0 |
| 3 | -21.5 | 21.5 | M2.5 | 4.0 |
| 4 | 21.5 | 21.5 | M2.5 | 4.0 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| Bottom mounting holes | 4 × M2.5 on 43.00 × 43.00, 4.0 deep max | M2.5 screws through a mounting plate | designed | all |
| Optical band | z 23.35–41.30, 360° | keep-out for mounts, covers and cables | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| SLAMTEC | RPLIDAR S3 datasheet v1.0 (CN) | web | Publisher's page; dimensions are facts |
| SLAMTEC | RPLIDAR S3 specification image | web | Publisher's page; dimensions are facts |
| OpenZeka | SLAMTEC RPLIDAR S3 datasheet v1.0 (EN) | web | Publisher's page; dimensions are facts |
Free files
★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
| slamtec-rplidar-s3 | SLAMTEC RPLIDAR S3 lidar: 55.6 mm base, M2.5 mounting holes and optical window height | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=slamtec-rplidar-s3
Fits with
Questions
What is the RPLIDAR S3 mounting-hole pattern?
Four M2.5 threaded holes on a 43.00 × 43.00 mm square in the bottom face, max 4.0 mm screw engagement.
How big is the RPLIDAR S3?
55.60 × 55.60 mm base, 41.30 mm overall height; the base is 23.35 mm tall.
What must stay clear?
The optical housing from 23.35 to 41.30 mm above the mounting face, all the way round.