Library › Hardware › Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in

1–1½ in solid cap, 45° back cone

Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.

STEP STL free, CC BY 4.0 (credit "Xem Studio")

Dimensions

size_in	1½
tube_od_mm	38.1
flange_mm	50.5
groove_mm	43.5
hub_mm	9.05

Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.

Set it up →

From the full sheet

Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in: every size, notes, mating features and sources. Is there a tri-clamp ferrule that 3D prints without supports?

Other sizes

½ in ferrule, 45° back cone, 0.5 in long
½ in ferrule, 45° back cone, 1.125 in long
½ in spool, 45° both ends, 3 in face to face
½ in spool, 45° both ends, 6 in face to face
½ in spool, 45° both ends, 12 in face to face
¾ in ferrule, 45° back cone, 0.5 in long
¾ in ferrule, 45° back cone, 1.125 in long
¾ in spool, 45° both ends, 3 in face to face
¾ in spool, 45° both ends, 6 in face to face
¾ in spool, 45° both ends, 12 in face to face
1 in ferrule, 45° back cone, 0.5 in long
1 in ferrule, 45° back cone, 1.125 in long
1 in spool, 45° both ends, 3 in face to face
1 in spool, 45° both ends, 6 in face to face
1 in spool, 45° both ends, 12 in face to face
1½ in ferrule, 45° back cone, 0.5 in long
1½ in ferrule, 45° back cone, 1.125 in long
1½ in spool, 45° both ends, 3 in face to face
1½ in spool, 45° both ends, 6 in face to face
1½ in spool, 45° both ends, 12 in face to face
2 in ferrule, 45° back cone, 0.5 in long
2 in ferrule, 45° back cone, 1.125 in long
2 in spool, 45° both ends, 3 in face to face
2 in spool, 45° both ends, 6 in face to face
2 in spool, 45° both ends, 12 in face to face
2½ in ferrule, 45° back cone, 0.5 in long
2½ in ferrule, 45° back cone, 1.125 in long
2½ in spool, 45° both ends, 3 in face to face
2½ in spool, 45° both ends, 6 in face to face
2½ in spool, 45° both ends, 12 in face to face
3 in ferrule, 45° back cone, 0.5 in long
3 in ferrule, 45° back cone, 1.125 in long
3 in spool, 45° both ends, 3 in face to face
3 in spool, 45° both ends, 6 in face to face
3 in spool, 45° both ends, 12 in face to face
4 in ferrule, 45° back cone, 0.5 in long
4 in ferrule, 45° back cone, 1.125 in long
4 in spool, 45° both ends, 3 in face to face
4 in spool, 45° both ends, 6 in face to face
4 in spool, 45° both ends, 12 in face to face
½–¾ in solid cap, 45° back cone
2 in solid cap, 45° back cone
2½ in solid cap, 45° back cone
3 in solid cap, 45° back cone
4 in solid cap, 45° back cone