Xem Studiomeasured geometryLibrary › Hardware › Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in
2½ in spool, 45° both ends, 3 in face to face
2½ in spool, 45° both ends, 3 in face to face
Exact dimensions. True size, no printing tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, CC BY 4.0 (credit "Xem Studio")
Dimensions
| size_in | 2½ |
|---|---|
| tube_od_mm | 63.5 |
| flange_mm | 77.5 |
| groove_mm | 70.5 |
| hub_mm | 9.85 |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in: every size, notes, mating features and sources. Is there a tri-clamp ferrule that 3D prints without supports?
Other sizes
- ½ in ferrule, 45° back cone, 0.5 in long
- ½ in ferrule, 45° back cone, 1.125 in long
- ½ in spool, 45° both ends, 3 in face to face
- ½ in spool, 45° both ends, 6 in face to face
- ½ in spool, 45° both ends, 12 in face to face
- ¾ in ferrule, 45° back cone, 0.5 in long
- ¾ in ferrule, 45° back cone, 1.125 in long
- ¾ in spool, 45° both ends, 3 in face to face
- ¾ in spool, 45° both ends, 6 in face to face
- ¾ in spool, 45° both ends, 12 in face to face
- 1 in ferrule, 45° back cone, 0.5 in long
- 1 in ferrule, 45° back cone, 1.125 in long
- 1 in spool, 45° both ends, 3 in face to face
- 1 in spool, 45° both ends, 6 in face to face
- 1 in spool, 45° both ends, 12 in face to face
- 1½ in ferrule, 45° back cone, 0.5 in long
- 1½ in ferrule, 45° back cone, 1.125 in long
- 1½ in spool, 45° both ends, 3 in face to face
- 1½ in spool, 45° both ends, 6 in face to face
- 1½ in spool, 45° both ends, 12 in face to face
- 2 in ferrule, 45° back cone, 0.5 in long
- 2 in ferrule, 45° back cone, 1.125 in long
- 2 in spool, 45° both ends, 3 in face to face
- 2 in spool, 45° both ends, 6 in face to face
- 2 in spool, 45° both ends, 12 in face to face
- 2½ in ferrule, 45° back cone, 0.5 in long
- 2½ in ferrule, 45° back cone, 1.125 in long
- 2½ in spool, 45° both ends, 6 in face to face
- 2½ in spool, 45° both ends, 12 in face to face
- 3 in ferrule, 45° back cone, 0.5 in long
- 3 in ferrule, 45° back cone, 1.125 in long
- 3 in spool, 45° both ends, 3 in face to face
- 3 in spool, 45° both ends, 6 in face to face
- 3 in spool, 45° both ends, 12 in face to face
- 4 in ferrule, 45° back cone, 0.5 in long
- 4 in ferrule, 45° back cone, 1.125 in long
- 4 in spool, 45° both ends, 3 in face to face
- 4 in spool, 45° both ends, 6 in face to face
- 4 in spool, 45° both ends, 12 in face to face
- ½–¾ in solid cap, 45° back cone
- 1–1½ in solid cap, 45° back cone
- 2 in solid cap, 45° back cone
- 2½ in solid cap, 45° back cone
- 3 in solid cap, 45° back cone
- 4 in solid cap, 45° back cone