Xem Studiomeasured geometryLibrary › Hardware › Framing ·
DIN rail, 35 mm (TS35 × 7.5, EN 60715)
What are 35 mm DIN rail dimensions? · Hardware · basis: EN 60715 top-hat rail TS35 × 7.5
- sizes
- 6 in table
Notes
- 35 mm wide (±0.3), 7.5 mm deep (15 mm deep version exists), 1 mm steel; lips 1 mm thick leave a 27 mm inner width. Mounting slots on 25 mm pitch down the centre.
- A printed clip hooks one lip and snaps over the other: the flange is 35.0 wide, so the clip's opening is 35.3 and the hook depth 1.0–1.2 mm with a spring tab.
- Files: the rail profile at 100 and 200 mm, for checking a printed enclosure clip.
Sizes
| dimension | mm |
|---|---|
| width | 35 |
| depth (TS35 × 7.5) | 7.5 |
| depth (TS35 × 15) | 15 |
| lip thickness | 1.0 |
| inner width | 27 |
| slot pitch | 25 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Wikipedia | DIN rail | web | CC BY-SA 4.0 (text) |
| McMaster-Carr | DIN rail (free STEP/IGES/STL per part, for your own design use; no redistribution) | STEP, IGES, STL, PDF | McMaster-Carr site terms: personal design use, no redistribution verify |
Free files
★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
| din-rail-35x7.5-100 | TS35 × 7.5 rail, 100 mm | STEP · STL |
| din-rail-35x7.5-200 | TS35 × 7.5 rail, 200 mm | STEP · STL |
Plain text: sheet.txt · JSON: /api/geometry?object=din-rail-35mm
Fits with
Questions
How wide is a DIN rail?
35 mm (TS35), 7.5 mm deep for the common rail, 15 mm for the deep one. The older 15 mm and 32 mm G-rails are different standards.
How do I design a 3D printed DIN rail clip?
Hook one lip (1 mm thick, 35 mm outer width), spring over the other with a 1.2 mm deep catch; leave 0.3 mm of clearance on the width.