Xem Studiomeasured geometryLibrary › Hardware › Rigging & lifting ·
Crosby HR-125 / HR-125M swivel hoist rings: bolt size, working load limit, torque and frame dimensions, 800 to 100 000 lb and M8 to M48
What are the dimensions, bolt size, torque and working load limit of a Crosby HR-125 swivel hoist ring? · Standard part · basis: Crosby's HR-125 (UNC) data sheet and a copy of its HR-125M (metric) sheet, read in this session; numbers only (the sheet's drawing letters are not defined in text)
Also called: crosby hr-125 dimensions, hr125 hoist ring, swivel hoist ring size chart, hoist ring bolt size, hoist ring torque, hr-125m metric hoist ring, hoist ring wll chart, 3/4-10 hoist ring, 1/2-13 hoist ring 2500 lb, crosby swivel hoist ring torque
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 31 in table
Notes
- A swivel hoist ring bolts into a tapped hole in the load and gives a bail that pivots 180° and swivels 360° for lifting at an angle. Inch rows are the HR-125 UNC sheet exactly as printed (WLL in lb, torque in ft-lb, dimensions in inches, weight in lb); metric rows are the HR-125M sheet (WLL in kg at the 5:1 and 4:1 design factors, dimensions in mm).
- Letters: A is the bolt, B the 'effective thread projection length' in the inch sheet; C to H are the sheet's own column letters. Neither sheet defines C to H in text (the drawing is an image), so no letter is interpreted here beyond its position, and in the metric copy the header letters were jumbled in the extracted text, so its columns are given in the order printed (B, C, D, E radius, F diameter, G, H) with the same caveat.
- Printed notes: ultimate load is 5 times the WLL (4.5 for the 7000 lb ring at 90°); bolts are Grade 8 alloy socket head cap screws to ASTM A574, long bolts are for soft metal such as aluminium, short bolts for ferrous work pieces only; frame 8 uses a hex head bolt. Torque values are for the supplied bolt. Use the maker's instructions; these are a size reference, not rigging advice.
- No file: the body is not defined by published numbers (letters undefined, bail and bushing shapes are not dimensioned), so a model would be invented. The thread is a plain bolt: the 'mating' rows list the thread sizes.
- McMaster-Carr's hoist-ring category is linked for per-part STEP; nothing is copied.
Crosby HR-125 / HR-125M swivel hoist rings: bolt size, working load… size chart
| series | units | frame | WLL | torque (ft-lb) | bolt size A | B | C | D | E | F | G | H | weight each (lb) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HR-125 UNC | in / lb | 1 | 800 | 7 | 5/16 - 18 x 1.50 | .58 | 2.72 | .97 | .46 | .34 | 1.87 | 1.12 | .37 |
| HR-125 UNC | in / lb | 1 | 1000 | 12 | 3/8 - 16 x 1.50 | .58 | 2.72 | .97 | .46 | .34 | 1.87 | 1.05 | .39 |
| HR-125 UNC | in / lb | 2 | 2500 | 28 | 1/2 - 13 x 2.00 | .70 | 4.85 | 1.96 | .87 | .69 | 3.35 | 2.29 | 2.33 |
| HR-125 UNC | in / lb | 2 | 2500 | 28 | 1/2 - 13 x 2.50 | 1.20 | 4.85 | 1.96 | .87 | .69 | 3.35 | 2.29 | 2.36 |
| HR-125 UNC | in / lb | 2 | 4000 | 60 | 5/8 - 11 x 2.00 | .70 | 4.85 | 1.96 | .87 | .69 | 3.35 | 2.16 | 2.41 |
| HR-125 UNC | in / lb | 2 | 4000 | 60 | 5/8 - 11 x 2.75 | 1.45 | 4.85 | 1.96 | .87 | .69 | 3.35 | 2.16 | 2.47 |
| HR-125 UNC | in / lb | 2 | 5000 | 100 | 3/4 - 10 x 2.25 | .95 | 4.85 | 1.96 | .87 | .69 | 3.35 | 2.04 | 2.52 |
| HR-125 UNC | in / lb | 2 | 5000 | 100 | 3/4 - 10 x 2.75 | 1.45 | 4.85 | 1.96 | .87 | .69 | 3.35 | 2.04 | 2.59 |
| HR-125 UNC | in / lb | 3 | 7000 (4.5:1 tested at 90°) | 100 | 3/4 - 10 x 2.75 | .89 | 6.57 | 2.96 | 1.36 | .94 | 4.87 | 2.97 | 6.72 |
| HR-125 UNC | in / lb | 3 | 7000 (4.5:1 tested at 90°) | 100 | 3/4 - 10 x 3.50 | 1.64 | 6.57 | 2.96 | 1.36 | .94 | 4.87 | 2.97 | 6.81 |
| HR-125 UNC | in / lb | 3 | 8000 | 160 | 7/8 - 9 x 2.75 | .89 | 6.57 | 2.96 | 1.36 | .94 | 4.87 | 2.84 | 6.84 |
| HR-125 UNC | in / lb | 3 | 8000 | 160 | 7/8 - 9 x 3.50 | 1.64 | 6.57 | 2.96 | 1.36 | .94 | 4.87 | 2.84 | 6.96 |
| HR-125 UNC | in / lb | 3 | 10000 | 230 | 1 - 8 x 3.00 | 1.14 | 6.57 | 2.96 | 1.36 | .94 | 4.87 | 2.72 | 7.09 |
| HR-125 UNC | in / lb | 3 | 10000 | 230 | 1 - 8 x 4.00 | 2.14 | 6.57 | 2.96 | 1.36 | .94 | 4.87 | 2.72 | 7.31 |
| HR-125 UNC | in / lb | 4 | 15000 | 470 | 1-1/4 - 7 x 4.50 | 2.21 | 8.72 | 3.71 | 1.75 | 1.19 | 6.18 | 3.93 | 14.51 |
| HR-125 UNC | in / lb | 5 | 24000 | 800 | 1-1/2 - 6 x 6.75 | 2.73 | 12.55 | 4.71 | 2.39 | 1.75 | 8.48 | 5.52 | 37.73 |
| HR-125 UNC | in / lb | 5 | 30000 | 1100 | 2 - 4-1/2 x 6.75 | 2.73 | 12.55 | 4.71 | 2.39 | 1.75 | 8.48 | 5.02 | 40.69 |
| HR-125 UNC | in / lb | 6 | 50000 | 2100 | 2-1/2 - 4 x 8.0 | 4.00 | 16.88 | 5.75 | 3.00 | 2.25 | 11.00 | 8.03 | 88.00 |
| HR-125 UNC | in / lb | 7 | 75000 | 4300 | 3 - 4 x 10.5 | 5.00 | 19.50 | 7.25 | 3.75 | 2.75 | 14.16 | 8.50 | 166.00 |
| HR-125 UNC | in / lb | 8 | 100000 | 5100 | 3-1/2 - 4 x 13.0 (hex head bolt) | 7.00 | 22.09 | 7.75 | 4.00 | 3.25 | 15.91 | 9.28 | 265.00 |
| HR-125M metric | mm / kg | 1 | 400 (5:1); 500 (4:1) | — | M8x1.25x40 | 16.9 | 69.9 | 24.6 | 11.8 | 8.5 | 47.5 | 29.9 | — |
| HR-125M metric | mm / kg | 1 | 450 (5:1); 550 (4:1) | — | M10x1.50x40 | 16.9 | 69.9 | 24.6 | 11.8 | 8.5 | 47.5 | 28.1 | — |
| HR-125M metric | mm / kg | 2 | 1050 (5:1); 1300 (4:1) | — | M12x1.75x50 | 16.9 | 123 | 49.8 | 22.3 | 17.5 | 85.1 | 60.4 | — |
| HR-125M metric | mm / kg | 2 | 1900 (5:1); 2400 (4:1) | — | M16x2.00x60 | 26.9 | 123 | 49.8 | 22.3 | 17.5 | 85.1 | 56.3 | — |
| HR-125M metric | mm / kg | 2 | 2150 (5:1); 2700 (4:1) | — | M20x2.50x65 | 31.9 | 123 | 49.8 | 22.3 | 17.5 | 85.1 | 52.3 | — |
| HR-125M metric | mm / kg | 3 | 3000 (5:1); 3750 (4:1) | — | M20x2.50x75 | 27.8 | 167 | 75.2 | 34.7 | 25.4 | 124 | 76.6 | — |
| HR-125M metric | mm / kg | 3 | 4200 (5:1); 5250 (4:1) | — | M24x3.00x80 | 32.8 | 167 | 75.2 | 34.7 | 25.4 | 124 | 70.5 | — |
| HR-125M metric | mm / kg | 4 | 7000 (5:1); 8750 (4:1) | — | M30x3.50x120 | 61.7 | 222 | 94.2 | 44.5 | 30.5 | 157 | 102 | — |
| HR-125M metric | mm / kg | 5 | 11000 (5:1); 13750 (4:1) | — | M36x4.00x150 | 54.0 | 318 | 120 | 60.7 | 44.5 | 215 | 142 | — |
| HR-125M metric | mm / kg | 5 | 12500 (5:1); 15600 (4:1) | — | M42x4.50x160 | 64.0 | 318 | 120 | 60.7 | 44.5 | 215 | 136 | — |
| HR-125M metric | mm / kg | 5 | 13500 (5:1); 16900 (4:1) | — | M48x5.00x160 | 74.0 | 318 | 120 | 60.7 | 44.5 | 215 | 130 | — |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| mounting bolt thread | 5/16-18, 3/8-16, 1/2-13, 5/8-11, 3/4-10, 7/8-9, 1-8, 1-1/4-7, 1-1/2-6, 2-4-1/2, 2-1/2-4, 3-4, 3-1/2-4 UNC (HR-125); M8 to M48 (HR-125M) | tapped hole in the load with the same thread, engagement per the sheet's effective thread projection column B | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| The Crosby Group | HR-125 UNC swivel hoist rings: frame size, stock number, WLL, torque, bolt size A, B to H, weight (catalogue sheet 9999525) | web | Maker data sheet; numbers only. The letters are the sheet's own; its drawing is an image |
| The Crosby Group (via M.E. Campbell copy) | HR-125M metric swivel hoist rings: frame, bolt size, WLL at 5:1 and 4:1, B to H in mm (© 2019) | web | Maker data sheet copy; numbers only. Header letters were jumbled in the extracted text |
| McMaster-Carr | Hoist rings (free STEP/IGES per part, for your own design use; no redistribution) | STEP, IGES, PDF | McMaster-Carr site terms: personal design use, no redistribution verify |
Xem scan
File coming
No downloadable true-size file yet: the published figures do not fix the whole shape, and Xem never guesses a number. A measured scan is planned; request it and it moves up.
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=hoist-rings-crosby-hr-125
Fits with
FreeLifting eye bolts, DIN 580, M6–M36: eye, collar, height, thread length (dimensions only)9 sizes★ sheetFreeRegular shoulder eye bolts, inch (drop forged), 1/4 to 1 in: eye, shoulder, overall and thread length (dimensions only)30 sizes★ sheetFreeLifting eye nuts, DIN 582, M6–M100x6: ring, collar, height and thread25 sizes★ sheetFreeShackles: Crosby G-209 / S-209 bow (anchor), G-210 / S-210 D (chain) and G-2130 bolt-type bow, 3/16 to 4 in — dimensions and WLL53 sizes★ sheetFreeCrosby H-331 / A-331 clevis slip hooks and H-324 eye slip hooks: working load limit and dimensions, 1/4 to 3/4 in chain size14 sizes★ sheetFreeWire rope clips: Crosby G-450 U-bolt and G-429 Fist Grip dimensions by rope size, clips required, turn back and torque61 sizes★ sheetFree
Socket head cap screws, M2–M8 (ISO 4762 / DIN 912)7 sizes★ 47 files
Questions
What bolt does a 5000 lb Crosby HR-125 hoist ring use?
3/4-10 UNC, 2.25 or 2.75 in long, tightened to 100 ft-lb, in frame size 2.
What is the WLL of the M16 HR-125M hoist ring?
1900 kg at the 5:1 design factor and 2400 kg at 4:1 (frame 2, M16x2.00x60).
How much torque for a 1/2-13 hoist ring?
28 ft-lb on the 2500 lb HR-125 sheet.