Library › 3D printing › Techniques ·
Perforated tear-off layer for 3D printing: one-time pull-tab lids, sealed capsules, breakaway supports (STL, STEP)
How do I 3D print a lid or support that tears off cleanly in one piece, like a one-time pull tab? · Hardware · basis: Xem technique. A layer of dots that the next layer bridges, used as a designed weak plane; related to tamper-evident designs that use stress concentrators and pause-and-insert containers (MakerWorld), and to support interface / contact-distance settings (Prusa, OrcaSlicer).
Also called: 3d print tear off tab, tamper evident 3d print, one time open container, breakaway support 3d print, perforated layer 3d printing, pause and insert container, frangible seal print, easy remove support
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 72 mm
- width
- 60 mm
- height
- 41.8 mm
Notes
- Starting values, not tested limits: 0.2 mm layer height, dots Ø0.8 mm at 2 mm pitch, exactly one layer tall, on a layer boundary (z a multiple of 0.2). Print the test strip first and pick the pitch that holds but tears cleanly.
- Smaller pitch or bigger dots = stronger seal; wider pitch tears more easily.
- Load a container: pause the print at the dotted layer's height, drop the item in, resume. The lid bridges the opening, so keep it under about 40 mm across or tune bridge settings.
- Breakaway support: keep the 0.4 mm side gap to the part and turn slicer supports off for that region.
- Tiny dots depend on the slicer: check the preview shows them; if it drops them, use 1.0 mm dots or turn off small-gap filtering.
Perforated tear-off layer for 3D printing: one-time pull-tab lids… size chart
| file | what | overall mm |
|---|---|---|
| perf-tab-box-40 | 40 × 40 × 20 mm one-time box: lid held by 76 dots (Ø0.8, 2 mm pitch, one 0.2 mm layer) on the wall tops, upright pull tab. Pause at z = 20 mm to load it | 40 × 40 × 31.8 |
| perf-tab-box-60x40 | 60 × 40 × 30 mm one-time box, same dotted seal; pause at z = 30 mm | 60 × 40 × 41.8 |
| perf-capsule-30 | Ø30 × 25 mm round capsule, dotted rim seal, pull-tab lid; pause at z = 25 mm | 30 × 30 × 36.8 |
| perf-breakaway-support-coupon | Breakaway support test: 30 mm overhang on a support block joined only by one dotted layer, 0.4 mm off the post | 40 × 20 × 23 |
| perf-test-strip | Calibration strip: three pull tabs on dotted layers at 1.5, 2 and 3 mm pitch | 72 × 22 × 12.2 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| dotted seal layer | Ø0.8 dots, 2 mm pitch, 1 layer | lid / tab / support above it | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| MakerWorld | Tamper Evident Seal with Container | web | Publisher's page; dimensions are facts |
| Prusa Research | Support material (contact Z distance, interface layers) | web | Publisher's page; dimensions are facts |
| OrcaSlicer | Support Advanced: Z distance, interface spacing | web | Publisher's page; dimensions are facts |
Free files
★ Free files 5 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| perf-tab-box-40 | 40 × 40 × 20 mm one-time box: lid held by 76 dots (Ø0.8, 2 mm pitch, one 0.2 mm layer) on the wall tops, upright pull tab. Pause at z = 20 mm to load it | STEP · STL |
| perf-tab-box-60x40 | 60 × 40 × 30 mm one-time box, same dotted seal; pause at z = 30 mm | STEP · STL |
| perf-capsule-30 | Ø30 × 25 mm round capsule, dotted rim seal, pull-tab lid; pause at z = 25 mm | STEP · STL |
| perf-breakaway-support-coupon | Breakaway support test: 30 mm overhang on a support block joined only by one dotted layer, 0.4 mm off the post | STEP · STL |
| perf-test-strip | Calibration strip: three pull tabs on dotted layers at 1.5, 2 and 3 mm pitch | STEP · STL |
https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=perforated-tear-off-layer

Fits with




Questions
How do I make a 3D printed tear-off tab?
Join the tab with one layer of dots instead of a solid layer. The next layer bridges the dots; pulling the tab breaks them along that layer.
How do I print something inside a sealed container?
Pause the print at the dotted layer height, drop the item in, and resume. The lid prints over it and only opens by tearing the seal.
Can this replace normal supports?
For a block under a flat overhang, yes: a support block joined by one dotted layer snaps off in one piece with little cleanup.
What dot size and spacing should I use?
Start at Ø0.8 mm dots, 2 mm apart, one 0.2 mm layer, then tune with the test strip for your filament.
Is it tamper evident?
Yes: once torn the dots can't be rejoined, so an opened lid is obvious.