Library › Hardware › Springs & flexures ·
3D printable spiral torsion springs: flat clock springs with square-key hub and lever version (STL, STEP)
How do I 3D print a torsion spring that returns a lever or knob to its start position? · Hardware · basis: Spiral torsion (clock) spring: flat strip wound in a plane that stores torque as it winds (Lesjöfors). Xem printable design: two Archimedean arms, square-key hub.
Also called: 3d printable clock spring, printable torsion spring stl, spiral return spring, flat spiral spring 3d print, spring loaded lever, power spring printable
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 67.5 mm
- width
- 60 mm
- height
- 10 mm
Notes
- Hold the hub still on the square post and turn the ring (or lever): the arms wind and push it back.
- Stiffness rises with arm thickness cubed: 1.4 mm arms are about 2.7× the 1.0 mm.
- Keep rotation to about 60–90° for long life. PETG or nylon; PLA arms creep and crack.
- Print flat. Gaps between the arms are 1.8 mm (Ø30) to 5.4 mm (Ø60), no supports.
3D printable spiral torsion springs: flat clock springs with… size chart
| file | what | overall mm |
|---|---|---|
| spiral-spring-od30-t0.8 | Ø30 × 5 mm, 0.8 mm arms, 2 arms × 1.5 turns, 5 mm square key: light return spring | 30 × 30 × 5 |
| spiral-spring-od40-t1.0 | Ø40 × 5 mm, 1.0 mm arms, 5 mm square key: general return spring | 40 × 40 × 5 |
| spiral-spring-od40-t1.4 | Ø40 × 5 mm, 1.4 mm arms: about 2.7× stiffer than the 1.0 mm | 40 × 40 × 5 |
| spiral-spring-od60-t1.4 | Ø60 × 6 mm, 1.4 mm arms, 4 mm ring, 7 mm square key: large, long travel | 60 × 60 × 6 |
| spiral-spring-od40-lever | Ø40 spring with a 25 mm lever on the ring: spring-return lever / clicker | 67.5 × 40 × 5 |
| spiral-spring-post-5mm | Square post for the 5 mm key hubs: 4.6 mm square shaft, Ø14 flange, M2.5 pilot hole | 14 × 14 × 10 |
| spiral-spring-post-7mm | Square post for the 7 mm key hub: 6.6 mm square shaft, Ø18 flange | 18 × 18 × 10 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| hub key hole | 5 or 7 mm square | spiral spring post or a square shaft | slide | all |
| spring post shaft | key − 0.4 mm square | spring hub | slide | posts* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Lesjöfors | What is a clock spring & how does it work? | web | Publisher's page; dimensions are facts |
| Lesjöfors | Spiral torsion springs | web | Publisher's page; dimensions are facts |
Free files
★ Free files 7 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| spiral-spring-od30-t0.8 | Ø30 × 5 mm, 0.8 mm arms, 2 arms × 1.5 turns, 5 mm square key: light return spring | STEP · STL |
| spiral-spring-od40-t1.0 | Ø40 × 5 mm, 1.0 mm arms, 5 mm square key: general return spring | STEP · STL |
| spiral-spring-od40-t1.4 | Ø40 × 5 mm, 1.4 mm arms: about 2.7× stiffer than the 1.0 mm | STEP · STL |
| spiral-spring-od60-t1.4 | Ø60 × 6 mm, 1.4 mm arms, 4 mm ring, 7 mm square key: large, long travel | STEP · STL |
| spiral-spring-od40-lever | Ø40 spring with a 25 mm lever on the ring: spring-return lever / clicker | STEP · STL |
| spiral-spring-post-5mm | Square post for the 5 mm key hubs: 4.6 mm square shaft, Ø14 flange, M2.5 pilot hole | STEP · STL |
| spiral-spring-post-7mm | Square post for the 7 mm key hub: 6.6 mm square shaft, Ø18 flange | STEP · STL |
https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=printable-spiral-torsion-springs

Fits with





Questions
Can you 3D print a torsion spring?
Yes, as a flat spiral. It prints flat with no supports and stores torque as the ring turns against the hub.
How far can a printed spiral spring turn?
About 60–90° for long life in PETG or nylon; more for a few cycles.
How do I mount it?
Press the square hub onto the matching square post (5 or 7 mm) and tie the ring or lever to the moving part.
How do I make it stronger?
Use the thicker arms (1.4 mm) or the Ø60 size; torque rises with arm thickness cubed.