Library › Car design › Car aero ·

RC 1/12 pan car wing and spoiler

Name: RC 1/12 pan car wing and spoiler dimension sheet
Creator: Xem Studio
License: https://creativecommons.org/licenses/by/4.0/

What wing and spoiler sizes do 1/12 pan cars use? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio

Also called: 1/12 pan car wing, pan car spoiler, 1/12 scale rc wing, rc pan car body, 1/12 on road wing rules, efra 1/12 rules, pan car side dams, rc spoiler size

Exact dimensions. True size, with no printing tolerance added.

sizes: 6 in table

Notes

1/12 on-road 'pan' cars run a moulded body with either a wing or a short spoiler, sized by rule. EFRA allows a wing 172 mm wide whose profile fits a 52 x 26 mm box, or a spoiler up to 25 mm high and 35 mm long, with side dams up to 72 mm high.
As on full-size cars, a spoiler is a body-edge lip while a wing is an airfoil with flow over both faces (CompetitionX).
Used on: 1/12 electric on-road cars.
The file is a reference example built by Xem Studio from the numbers above (EFRA 1/12 maximum box.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

RC 1/12 pan car wing and spoiler size chart

parameter	value or range	source
Wing width	max 172 mm	EFRA
Wing profile box	52 mm (height) x 26 mm	EFRA
Spoiler	max 25 mm high, 35 mm long	EFRA
Max wing/spoiler height	65 mm	EFRA
Side dam	max 72 mm high	EFRA
Overall width / length	172 mm / 340 mm	EFRA

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

EFRA	EFRA Handbook 2010, Appendix 3: Electric Cars	web	Publisher's page; dimensions are facts
CompetitionX	RC Wings Explained	web	Publisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

rc-pan-car-wing-rear-wing

single rear wing: span 172 × chord 26 mm at 6°, endplates 52 mm, inverted NACA 4412 section (mounts from below)

STEP · STL

Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.

Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=rc-pan-car-wing