Library › 3D printing › 3D printable snap-fit hooks and catches: cantilever latch, permanent…

Snap-fit hook, medium, permanent (90° back face, locks for good)

Snap-fit hook, medium: beam 15 mm long × 1.6 mm thick × 8 mm wide, 1.2 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate

Exact dimensions. True size, no tolerance added. Threads are plain cylinders at the major diameter.

STEP STL free, Xem Studio Design License — Xem Studio

Dimensions

filesnap-hook-m-permanent
L × t × w mm15 × 1.6 × 8
undercut y mm1.2
overall mm10.8 × 12 × 20.578
Let your AI pull this. Claude: add Xem in one click. ChatGPT, Cursor or any MCP client: add https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

From the full sheet

3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP): every size, notes, mating features and sources. What size should a 3D printed snap-fit hook be, and is there a ready hook and catch I can drop into my design?

Other sizes