Library › 3D printing › 3D printable snap-fit hooks and catches: cantilever latch, permanent…

Snap-fit hook, small, releasable (45° back face, pulls apart)

Snap-fit hook, small: beam 10 mm long × 1.2 mm thick × 6 mm wide, 0.8 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate

Exact dimensions. True size, no tolerance added. Threads are plain cylinders at the major diameter.

STEP STL free, Xem Studio Design License — Xem Studio

Dimensions

filesnap-hook-s-releasable
L × t × w mm10 × 1.2 × 6
undercut y mm0.8
overall mm10 × 10 × 15.686
Let your AI pull this. Claude: add Xem in one click. ChatGPT, Cursor or any MCP client: add https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

From the full sheet

3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP): every size, notes, mating features and sources. What size should a 3D printed snap-fit hook be, and is there a ready hook and catch I can drop into my design?

Other sizes