Library › 3D printing › 3D printable snap-fit hooks and catches: cantilever latch, permanent…
Snap-fit hook, extra large, releasable (45° back face, pulls apart)
Snap-fit hook, extra large: beam 30 mm long × 3.0 mm thick × 12 mm wide, 2.4 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate
Exact dimensions. True size, no tolerance added. Threads are plain cylinders at the major diameter.
STEP STL free, Xem Studio Design License — Xem Studio
Dimensions
| file | snap-hook-xl-releasable |
|---|---|
| L × t × w mm | 30 × 3.0 × 12 |
| undercut y mm | 2.4 |
| overall mm | 13.4 × 16 × 40.057 |
Let your AI pull this. Claude: add Xem in one click. ChatGPT, Cursor or any MCP client: add
Set it up →https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.From the full sheet
3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP): every size, notes, mating features and sources. What size should a 3D printed snap-fit hook be, and is there a ready hook and catch I can drop into my design?
Other sizes
- Snap-fit hook, small, permanent (90° back face, locks for good)
- Snap-fit hook, small, releasable (45° back face, pulls apart)
- Catch for the small hook
- Snap-fit hook, medium, permanent (90° back face, locks for good)
- Snap-fit hook, medium, releasable (45° back face, pulls apart)
- Catch for the medium hook
- Snap-fit hook, large, permanent (90° back face, locks for good)
- Snap-fit hook, large, releasable (45° back face, pulls apart)
- Catch for the large hook
- Snap-fit hook, extra large, permanent (90° back face, locks for good)
- Catch for the extra large hook