Xem Studiomeasured geometryLibrary › Tri-clamp & pipe › Pipe, tube & threads ·
Stainless tube, metric hygienic: DIN 11850 (= EN 10357-A, DN10–DN200) and Reihe 1, ISO 1127 and 'Range C' lists, OD × wall + 100 mm sections
What are the OD and wall of DIN 11850 / EN 10357 stainless dairy tube (DN25 = 29 × 1.5), and which ISO 1127 and inch-OD sizes are in the same family? · Standard part · basis: Alfa Laval's DIN fittings and tubes catalog (EN 10357-A / DIN 11866-A and Reihe 1), McMaster-Carr's DIN 11850 listing (DN10 to DN100) and Integraflow's DN25 to DN100 listings agree; ISO 1127 and 'Range' lists are a catalogue list (single source)
Also called: din 11850 dn25 od, din 11850 tube dimensions, dn50 stainless tube 53 x 1.5, en 10357-a dimensions, din 11850 reihe 2, din 11850 reihe 1, iso 1127 tube sizes, dn40 41 x 1.5 stainless, hygienic stainless tube dn10 13 x 1.5, dairy tube dn80 85 x 2, milchrohr maße, din 11866 series a tube, din 11850 dn100 104 x 2, stainless tube 29 x 1.5
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 204.0 mm
- width
- 204.0 mm
- height
- 100.0 mm
Notes
- DIN 11850 is the German standard for stainless tube for the food and chemical industries (milk tube, 'Milchrohr'). In the tube sizes read, the current series ('Reihe 2', which Alfa Laval says is the same as EN 10357-A and the dimensions of DIN 11866-A) is named by DN but fixed by outside diameter: DN10 13 × 1.5, DN15 19 × 1.5, DN20 23 × 1.5, DN25 29 × 1.5, DN32 35 × 1.5, DN40 41 × 1.5, DN50 53 × 1.5, DN65 70 × 2, DN80 85 × 2, DN100 104 × 2, DN125 129 × 2, DN150 154 × 2, DN200 204 × 2 mm. McMaster-Carr prints the same OD and wall and the bore (ID) for DN10 to DN100, and Integraflow prints DN25 to DN100 OD × wall; all equal Alfa Laval's (the ID column here is OD − 2 × wall, which equals McMaster's printed IDs).
- 'Reihe 1' is the older DIN 11850 series, 1 mm wall: DN10 12, DN15 18, DN20 22, DN25 28, DN32 34, DN40 40, DN50 52 mm OD. Alfa Laval says it differs from EN 10357-A up to DN50 and that DIN 11851 'W' unions are the one connection made for it. A catalogue list (hosted by dcldesign) prints the same sizes as 'DN 10 Range 1' to 'DN 50 Range 1'. 'Reihe 3' was not found in any source read and is not on this page.
- Tolerances on OD as Alfa Laval prints them: EN 10357-A ±0.10 / 0.10 / 0.12 / 0.15 / 0.18 / 0.21 / 0.27 / 0.35 / 0.43 / 0.78 / 0.97 / 1.16 / 1.53 mm for DN10 to DN200; DIN 11866 the same up to DN80, then ±0.52 / 0.65 / 0.77 / 1.02 for DN100 to DN200. Wall tolerance: EN 10357-A ±0.15 mm (DN10–DN50) and ±0.20 mm (DN65–DN200); DIN 11866 ±0.15 mm throughout. McMaster-Carr's OD tolerances for DN10 to DN100 equal the EN 10357-A figures.
- ISO 1127 is the international standard for stainless tube dimensions with OD series (1, 2, 3) and tolerance classes; EN ISO 1127 tolerance classes as Nova Trading prints them: OD D1 ±1.5 % (not less than ±0.75 mm), D2 ±1 % (±0.5 mm), D3 ±0.75 % (±0.3 mm), D4 ±0.5 % (±0.1 mm); wall T1 ±15 % (±0.6 mm), T2 ±12.5 % (±0.4), T3 ±10 % (±0.2), T4 ±7.5 % (±0.15), T5 ±5 % (±0.1). The ISO 1127 rows and the 'Range B / C' rows come from a catalogue list whose columns were split in the text read, so only rows carrying a series, DN or 'Range' label on the same line were used; ODs 10.2, 13.5, 17.2, 21.3, 26.9, 33.7, 42.4, 48.3, 60.3, 76.1, 88.9, 114.3, 139.7, 168.3, 219.1 are the usual pipe-size ODs. What 'Range A / B / C' means is not stated; Range A equals Reihe 2, and the Range C rows equal the inch A270 tube (12.7 × 1.65, 19.05 × 1.65, ... 101.6 × 2.11, 152.4 × 2.77), which is why they sit on this page. Treat the ISO 1127 and Range rows as single-source.
- DIN 32676 clamp ferrules (series A, metric) weld to the Reihe 2 tube: sanitary-clamp-din-32676-ferrules has the same ODs (13, 19, 23, 29, 35, 41, 53, 70, 85, 104, 129, 154 mm). Inch OD sanitary tube is stainless-sanitary-tube-astm-a270-od-sizes. Files: 100 mm hollow sections of every Reihe 2 and Reihe 1 size (20 files); the length is Xem's example length.
Stainless tube, metric hygienic: DIN 11850 (= EN 10357-A… size chart
| series | DN / size | OD, mm | wall, mm | ID, mm (OD − 2 × wall) | OD tol. EN 10357-A, mm | OD tol. DIN 11866, mm | wall tol. EN 10357-A, mm | wall tol. DIN 11866, mm |
|---|---|---|---|---|---|---|---|---|
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN10 | 13 | 1.5 | 10 | ±0.1 | ±0.1 | ±0.15 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN15 | 19 | 1.5 | 16 | ±0.1 | ±0.1 | ±0.15 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN20 | 23 | 1.5 | 20 | ±0.12 | ±0.12 | ±0.15 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN25 | 29 | 1.5 | 26 | ±0.15 | ±0.15 | ±0.15 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN32 | 35 | 1.5 | 32 | ±0.18 | ±0.18 | ±0.15 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN40 | 41 | 1.5 | 38 | ±0.21 | ±0.21 | ±0.15 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN50 | 53 | 1.5 | 50 | ±0.27 | ±0.27 | ±0.15 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN65 | 70 | 2 | 66 | ±0.35 | ±0.35 | ±0.2 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN80 | 85 | 2 | 81 | ±0.43 | ±0.43 | ±0.2 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN100 | 104 | 2 | 100 | ±0.78 | ±0.52 | ±0.2 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN125 | 129 | 2 | 125 | ±0.97 | ±0.65 | ±0.2 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN150 | 154 | 2 | 150 | ±1.16 | ±0.77 | ±0.2 | ±0.15 |
| DIN 11850 Reihe 2 = EN 10357-A = DIN 11866-A | DN200 | 204 | 2 | 200 | ±1.53 | ±1.02 | ±0.2 | ±0.15 |
| DIN 11850 Reihe 1 (older series) | DN10 | 12 | 1 | 10 | — | — | — | — |
| DIN 11850 Reihe 1 (older series) | DN15 | 18 | 1 | 16 | — | — | — | — |
| DIN 11850 Reihe 1 (older series) | DN20 | 22 | 1 | 20 | — | — | — | — |
| DIN 11850 Reihe 1 (older series) | DN25 | 28 | 1 | 26 | — | — | — | — |
| DIN 11850 Reihe 1 (older series) | DN32 | 34 | 1 | 32 | — | — | — | — |
| DIN 11850 Reihe 1 (older series) | DN40 | 40 | 1 | 38 | — | — | — | — |
| DIN 11850 Reihe 1 (older series) | DN50 | 52 | 1 | 50 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN8 | 6.35 | 0.89 | 4.57 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN10 | 9.53 | 0.89 | 7.75 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN15 | 12.7 | 1.65 | 9.40 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN20 | 19.05 | 1.65 | 15.75 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN25 | 25.4 | 1.65 | 22.10 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN40 | 38.1 | 1.65 | 34.80 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN50 | 50.8 | 1.65 | 47.50 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN65 | 63.5 | 1.65 | 60.20 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN80 | 76.2 | 1.65 | 72.90 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN100 | 101.6 | 2.11 | 97.38 | — | — | — | — |
| 'Range C' (catalogue label; equals the inch A270 tube) | DN150 | 152.4 | 2.77 | 146.86 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN6 | 10.2 | 1.6 | 7.00 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN8 | 13.5 | 1.6 | 10.30 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN10 | 17.2 | 1.6 | 14.00 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN15 | 21.3 | 1.6 | 18.10 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN20 | 26.9 | 1.6 | 23.70 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN25 | 33.7 | 2 | 29.70 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN32 | 42.4 | 2 | 38.40 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN40 | 48.3 | 2 | 44.30 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN50 | 60.3 | 2 | 56.30 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN65 | 76.1 | 2 | 72.10 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN80 | 88.9 | 2.3 | 84.30 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN100 | 114.3 | 2.3 | 109.70 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN125 | 139.7 | 2.6 | 134.50 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN150 | 168.3 | 2.6 | 163.10 | — | — | — | — |
| 'Range B' (catalogue label; ODs are the ISO 1127 series 1 ODs) | DN200 | 219.1 | 2.6 | 213.90 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1/8 in | 10.2 | 2 | 6.20 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1/4 in | 13.5 | 1.6 | 10.30 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1/4 in | 13.5 | 2 | 9.50 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 3/8 in | 17.2 | 1.6 | 14.00 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 3/8 in | 17.2 | 2 | 13.20 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1/2 in | 21.3 | 1.6 | 18.10 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1/2 in | 21.3 | 2 | 17.30 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 3/4 in | 26.9 | 1.6 | 23.70 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 3/4 in | 26.9 | 2 | 22.90 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1 in | 33.7 | 1.6 | 30.50 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1 in | 33.7 | 2 | 29.70 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1-1/4 in | 42.4 | 1.6 | 39.20 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1-1/4 in | 42.4 | 2 | 38.40 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1-1/2 in | 48.3 | 1.6 | 45.10 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 1-1/2 in | 48.3 | 2 | 44.30 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 2 in | 60.3 | 1.6 | 57.10 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 2 in | 60.3 | 2 | 56.30 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 2-1/2 in | 76.1 | 1.6 | 72.90 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 2-1/2 in | 76.1 | 2 | 72.10 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 3 in | 88.9 | 1.6 | 85.70 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 3 in | 88.9 | 2 | 84.90 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 4 in | 114.3 | 2 | 110.30 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 5 in | 139.7 | 2 | 135.70 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 6 in | 168.3 | 2 | 164.30 | — | — | — | — |
| ISO 1127 series 1 (catalogue list) | 8 in | 219.1 | 2 | 215.10 | — | — | — | — |
| ISO 1127 series 2 (catalogue list) | — | 6 | 1 | 4.00 | — | — | — | — |
| ISO 1127 series 2 (catalogue list) | — | 8 | 1 | 6.00 | — | — | — | — |
| ISO 1127 series 2 (catalogue list) | — | 10 | 1 | 8.00 | — | — | — | — |
| ISO 1127 series 2 (catalogue list) | — | 16 | 1 | 14.00 | — | — | — | — |
| ISO 1127 series 2 (catalogue list) | — | 57 | 2 | 53.00 | — | — | — | — |
| ISO 1127 series 2 (catalogue list) | — | 70 | 2 | 66.00 | — | — | — | — |
| ISO 1127 series 3 (catalogue list) | — | 30 | 2 | 26.00 | — | — | — | — |
| ISO 1127 series 3 (catalogue list) | — | 44.5 | 2 | 40.50 | — | — | — | — |
| ISO 1127 series 3 (catalogue list) | — | 54 | 2 | 50.00 | — | — | — | — |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| tube OD | DN10 13, DN15 19, DN20 23, DN25 29, DN32 35, DN40 41, DN50 53, DN65 70, DN80 85, DN100 104, DN125 129, DN150 154 mm (Reihe 2 / EN 10357-A) | weld-end tube stub of a DIN 32676 series A ferrule of the same DN (sanitary-clamp-din-32676-ferrules): same OD | slide | tube-din11850-r2-* |
| wall | 1.5 mm DN10 to DN50, 2.0 mm DN65 to DN150 | ferrule weld-end wall on sanitary-clamp-din-32676-ferrules: butt-weld, same wall | designed | tube-din11850-r2-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Alfa Laval | DIN Fittings and Tubes catalog: EN 10357-A / DIN 11866-A tube DN10-DN200, DIN 11850 Reihe 1, OD and wall tolerances | web | Maker catalog; numbers only |
| McMaster-Carr | DIN 11850 stainless tubing (OD, tolerance, wall, ID, DN10 to DN100) (free STEP/IGES per part, for your own design use; no redistribution) | STEP, IGES, PDF | McMaster-Carr site terms: personal design use, no redistribution verify |
| Integraflow | Stainless hygienic pipe, metric DN, DIN 11850: DN25 to DN100 OD x wall | web | Distributor listing; numbers only |
| Metric stainless pipe sizes list (Gillain-style catalogue, hosted by dcldesign) | Metric stainless pipe sizes: OD x wall with DIN 11850 range / ISO 1127 series labels | web | Catalogue list; numbers only. Columns were split in the text read, so only rows that carry a label on the same line are used |
| Nova Trading | EN ISO 1127 dimensional tolerances for welded and seamless tubes (OD classes D1-D4, wall classes T1-T5) | web | Reference page; numbers only |
Free files
★ Free files 20 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
| tube-din11850-r2-dn10-13x1p5-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN10, 13 × 1.5 mm: OD Ø13.00, wall 1.500, bore Ø10.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn15-19x1p5-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN15, 19 × 1.5 mm: OD Ø19.00, wall 1.500, bore Ø16.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn20-23x1p5-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN20, 23 × 1.5 mm: OD Ø23.00, wall 1.500, bore Ø20.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn25-29x1p5-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN25, 29 × 1.5 mm: OD Ø29.00, wall 1.500, bore Ø26.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn32-35x1p5-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN32, 35 × 1.5 mm: OD Ø35.00, wall 1.500, bore Ø32.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn40-41x1p5-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN40, 41 × 1.5 mm: OD Ø41.00, wall 1.500, bore Ø38.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn50-53x1p5-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN50, 53 × 1.5 mm: OD Ø53.00, wall 1.500, bore Ø50.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn65-70x2p0-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN65, 70 × 2 mm: OD Ø70.00, wall 2.000, bore Ø66.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn80-85x2p0-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN80, 85 × 2 mm: OD Ø85.00, wall 2.000, bore Ø81.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn100-104x2p0-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN100, 104 × 2 mm: OD Ø104.00, wall 2.000, bore Ø100.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn125-129x2p0-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN125, 129 × 2 mm: OD Ø129.00, wall 2.000, bore Ø125.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn150-154x2p0-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN150, 154 × 2 mm: OD Ø154.00, wall 2.000, bore Ø150.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r2-dn200-204x2p0-100mm | DIN 11850 Reihe 2 / EN 10357-A tube DN200, 204 × 2 mm: OD Ø204.00, wall 2.000, bore Ø200.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r1-dn10-12x1p0-100mm | DIN 11850 Reihe 1 tube DN10, 12 × 1 mm: OD Ø12.00, wall 1.000, bore Ø10.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r1-dn15-18x1p0-100mm | DIN 11850 Reihe 1 tube DN15, 18 × 1 mm: OD Ø18.00, wall 1.000, bore Ø16.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r1-dn20-22x1p0-100mm | DIN 11850 Reihe 1 tube DN20, 22 × 1 mm: OD Ø22.00, wall 1.000, bore Ø20.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r1-dn25-28x1p0-100mm | DIN 11850 Reihe 1 tube DN25, 28 × 1 mm: OD Ø28.00, wall 1.000, bore Ø26.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r1-dn32-34x1p0-100mm | DIN 11850 Reihe 1 tube DN32, 34 × 1 mm: OD Ø34.00, wall 1.000, bore Ø32.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r1-dn40-40x1p0-100mm | DIN 11850 Reihe 1 tube DN40, 40 × 1 mm: OD Ø40.00, wall 1.000, bore Ø38.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
| tube-din11850-r1-dn50-52x1p0-100mm | DIN 11850 Reihe 1 tube DN50, 52 × 1 mm: OD Ø52.00, wall 1.000, bore Ø50.00, 100 mm long (Xem's example length; cut to the length you need); plain hollow section, no ends, seam or finish | STEP · STL |
Let your AI pull this. Add
Set it up →https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=stainless-tube-din-11850-en-10357-iso-1127
Fits with
Free
DIN 32676 clamp ferrules, series A (metric), DN10 to DN15012 sizes★ 24 filesFree
DIN 32676 clamp gaskets (Type B profile), DN10 to DN15012 sizes★ 12 filesFree
Two-bolt clamps for DIN 32676 flanges 34, 106, 155 and 183 mm4 sizes★ 4 filesFree
Stainless sanitary tube (ASTM A270) OD sizes: 1/2 to 12 in OD, 18 / 16 / 14 / 12 gauge walls, ID and weight + 100 mm sections for tri-clamp ferrule work203.2×203.2×100.0 mm★ 10 filesFree
Sanitary clamp end caps (16AMP): ½ to 4 in6 sizes★ 6 filesFree
Stainless steel pipe ASME B36.19M: OD and wall thickness for Sch 5S, 10S, 40S, 80S, NPS 1/8 to 12 (+ 14 to 18 in 5S / 10S) + hollow pipe STEP/STL21 sizes★ 13 files
Questions
What is the OD of DN25 DIN 11850 tube?
29 mm OD × 1.5 mm wall (ID 26 mm) in the current series (Reihe 2 = EN 10357-A); the older Reihe 1 DN25 is 28 × 1 mm.
What is DN50 stainless dairy tube?
53 × 1.5 mm (ID 50 mm) in Reihe 2; Reihe 1 DN50 is 52 × 1 mm.
Does DIN 11850 tube fit a tri-clamp ferrule?
Only DIN 32676 (metric) ferrules weld to it; inch ISO 2852 / tri-clamp ferrules are for inch-OD tube (A270): 1 in is 25.4 mm OD, DN25 is 29 mm.