Xem Studiomeasured geometry

Library › Hardware › Framing ·

T-slot bench tops for 15-series frames: 24 × 30 to 36 × 96 in, ¾ and 1 in thick

How do I bolt a worktop to a 1515 T-slot frame? · Hardware · basis: Xem Studio design: flat panels whose holes sit on the centre lines of a 1.5 in rail running under every edge (0.75 in in from each edge), counterbored for a 5/16-18 socket head cap screw into a slide-in T-nut

Exact dimensions. True size, with no printing tolerance added.

sizes
14 in table

Notes

  • Edges flush with the frame's outer faces when the frame's outside size equals the top. Holes no more than 12 in apart along each edge; add a cross rail for longer spans and drill its holes from the frame.

Sizes

size_inthickness_inholes
24 × 300.7510
24 × 301.010
24 × 480.7512
24 × 481.012
30 × 480.7514
30 × 481.014
30 × 600.7516
30 × 601.016
30 × 720.7518
30 × 721.018
36 × 720.7518
36 × 721.018
36 × 960.7522
36 × 961.022

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

80/2015 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware)webmaker's catalogue; numbers cited

Free files

★ Free files 14 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

bench-top-24x30x0.75in24 × 30 × 0.75 in top: 10 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-24x30x1in24 × 30 × 1 in top: 10 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-24x48x0.75in24 × 48 × 0.75 in top: 12 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-24x48x1in24 × 48 × 1 in top: 12 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-30x48x0.75in30 × 48 × 0.75 in top: 14 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-30x48x1in30 × 48 × 1 in top: 14 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-30x60x0.75in30 × 60 × 0.75 in top: 16 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-30x60x1in30 × 60 × 1 in top: 16 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-30x72x0.75in30 × 72 × 0.75 in top: 18 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-30x72x1in30 × 72 × 1 in top: 18 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-36x72x0.75in36 × 72 × 0.75 in top: 18 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-36x72x1in36 × 72 × 1 in top: 18 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-36x96x0.75in36 × 96 × 0.75 in top: 22 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL
bench-top-36x96x1in36 × 96 × 1 in top: 22 Ø8.73 holes with Ø13.5 × 8.4 counterbores on the rail centre lines (0.75 in in), ≤ 12 in apartSTEP · STL

Plain text: sheet.txt · JSON: /api/geometry?object=t-slot-bench-tops

T-slot bench tops for 15-series frames: 24 × 30 to 36 × 96 in, ¾ and 1 in thick, isometric render of a generated part
Render of bench-top-30x60x1in from the free STEP; not to scale.

Fits with

1515 T-slot extrusion, 1.5 × 1.5 in (15-series inch), isometric render of a generated part
1515 T-slot extrusion, 1.5 × 1.5 in (15-series inch)38.1×38.1 mm★ 16 files
Slide-in T-nuts for 20, 30, 40, 45 mm and 1 in, 1.5 in T-slot extrusion, isometric render of a generated part
Slide-in T-nuts for 20, 30, 40, 45 mm and 1 in, 1.5 in T-slot extrusion6 sizes★ 13 files
Socket head cap screws, inch: #10-24, #10-32, 5/16-18, 3/8-16, 1/2-13 (ASME B18.3), isometric render of a generated part
Socket head cap screws, inch: #10-24, #10-32, 5/16-18, 3/8-16, 1/2-13 (ASME B18.3)5 sizes★ 25 files
Button head socket cap screws, inch: #4-40 to 1/2-13 (ASME B18.3), isometric render of a generated part
Button head socket cap screws, inch: #4-40 to 1/2-13 (ASME B18.3)9 sizes★ 25 files
L corner brackets for 20, 30, 40, 45 mm and 1 in, 1.5 in T-slot extrusion, isometric render of a generated part
L corner brackets for 20, 30, 40, 45 mm and 1 in, 1.5 in T-slot extrusion6 sizes★ 6 files

Questions

Which screw?

5/16-18 × 1¼ in (¾ in top) or 1½ in (1 in top) socket head cap screws into 15-series slide-in T-nuts.