Library › Mechanisms › Intermittent motion ·
3D printable lever ratchet with two arc pawls and spiral return spring (STL, STEP)
How do I build a lever-operated ratchet with a drive pawl and a holding pawl in a 3D print? · Hardware · basis: Lever ratchet with two arc pawls: designed for 3D printing, exact nominal mm.
Also called: lever ratchet mechanism, ratchet with two pawls, arc pawl ratchet, flexure pawl, printed ratchet lever, feed ratchet
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 132.0 mm
- width
- 95.0 mm
- height
- 14.9 mm
Notes
- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: lever-ratchet-assembled; step to the nearest standard size (and redraw the hole or pocket it fits): lever-ratchet-spring.
- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
- Wheel OD 50, 24 teeth (15 degree steps), 10.2 thick so it spans both pawl layers.
- Arc pawls: 1.4 mm strips sweeping 60 degrees at 0.5 mm outside the teeth, tooth just behind the radial face.
- Return spring: spiral spring OD 30 with a 15 mm lever on a 5 mm square post, pushing the lever arm.
- Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.
3D printable lever ratchet with two arc pawls and spiral return spring size chart
| file | what | overall mm |
|---|---|---|
| lever-ratchet-assembled | assembled: 4 parts in place | 132 × 95 × 14.9 |
| lever-ratchet-base | lever ratchet base | 132 × 95 × 14.9 |
| lever-ratchet-wheel | lever ratchet wheel | 50 × 50 × 10.2 |
| lever-ratchet-lever | lever ratchet lever | 114 × 68 × 5 |
| lever-ratchet-spring | lever ratchet spring | 47.5 × 30 × 5 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| wheel bore | Ø5.4 on Ø5 pin | base pin | run | wheel* |
| spring hub | 5.0 square hole | 4.6 square post | slide | spring* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Wikipedia | Ratchet (device) | web | Publisher's page; dimensions are facts |
| Wikipedia | Pawl | web | Publisher's page; dimensions are facts |
Free files
★ Free files 5 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| lever-ratchet-assembled | lever ratchet assembly | STEP · STL |
| lever-ratchet-base | lever ratchet base | STEP · STL |
| lever-ratchet-wheel | lever ratchet wheel | STEP · STL |
| lever-ratchet-lever | lever ratchet lever | STEP · STL |
| lever-ratchet-spring | lever ratchet spring | STEP · STL |
https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=lever-ratchet-with-arc-pawls

Fits with



Questions
Why two pawls?
One drives the wheel forward with the lever, the other holds it while the lever springs back.
How far does each stroke turn the wheel?
One tooth (15 degrees) per tooth of lever travel.
Do the pawls need springs?
No, the arc strips are their own springs.