Library › Mechanisms › Intermittent motion ·

3D printable spring-lever star-wheel ratchet indexer: 8-step index wheel with printed leaf-spring lever (STL, STEP)

How do I make a 3D printed indexing wheel that clicks in fixed steps? · Hardware · basis: Spring-lever star-wheel ratchet indexer: designed for 3D printing, exact nominal mm.

Also called: star wheel indexer, ratchet indexer 3d print, index wheel detent, spring lever ratchet, indexing mechanism stl, star wheel detent

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
72.0 mm
width
90.0 mm
height
9.7 mm

Notes

  • Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: star-indexer-assembled; step to the nearest standard size (and redraw the hole or pocket it fits): star-indexer-spring-lever.
  • Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
  • 8 teeth = 45 degree steps; the lever tip sits in a valley against the radial tooth face.
  • The leaf spring is printed on the lever; preload it against the 6 mm post (bend it slightly when assembling).
  • Wheel: OD 44, 7 mm tooth depth, bore 5.4 for the 5 mm pin.
  • Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.

3D printable spring-lever star-wheel ratchet indexer: 8-step index… size chart

filewhatoverall mm
star-indexer-assembledassembled: 3 parts in place72 × 90 × 9.7
star-indexer-basestar indexer base72 × 90 × 9.7
star-indexer-wheelstar indexer wheel44 × 44 × 5
star-indexer-spring-leverstar indexer lever44.8 × 21.3 × 5

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
wheel and lever boresØ5.4 on Ø5 pinbase pinsrunall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaRatchet (device)webPublisher's page; dimensions are facts
WikipediaDetentwebPublisher's page; dimensions are facts

Free files

★ Free files 4 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
star-indexer-assembledstar indexer assemblySTEP · STL
star-indexer-basestar indexer baseSTEP · STL
star-indexer-wheelstar indexer wheelSTEP · STL
star-indexer-spring-leverstar indexer leverSTEP · STL
Let your AI pull this. Claude: add Xem in one click. ChatGPT, Cursor or any MCP client: add https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=star-wheel-ratchet-indexer

3D printable spring-lever star-wheel ratchet indexer: 8-step index wheel with printed leaf-spring lever (STL, STEP), isometric render of a generated part
Render of star-indexer-assembled from the free STEP; not to scale.

Fits with

Questions

How many steps per turn?

8 (45 degrees each).

Why does it lock one way?

The teeth have a radial face on one side: the lever tip catches it counter-clockwise and rides up the slope clockwise.

Do I need a metal spring?

No, the leaf spring is printed on the lever.